Update information of LCoV

22 May 2014 Version 0.82.01

Add

• Add curve-attribute to line of compnent pattern..
• Add "Shared block" and "Fixed block" attribute to component.

"Shared block" attribute can be used for the power symbols of multi blocks logics, OP amps.
"Fixed block"attribute can be used for the large and complex components which are defined as parted symbols.

03 May 2014 Version 0.81.10

Fix

• Fails on loading large size file.

15 Aug 2013 Version 0.81.01

Fix:

• In a spread sheet type pin property window, long pin name could not be edited.

Add:

• You can swap display pisition of pin number and pin name.
  It is valid only in LCoV's work area.

31 Jul 2013 Version 0.81.00

Add:

• You can enable/disable "edit node mode" with Ctrl+D.
• You can show/hide pin functions of a multi functions pin.
  • In "PIN NAME", pin functions must be separated with a slash.
    for example:   P01/D1/TxD1/TIMER3IO
  • Show/Hide setting is cleared when a pin name is changed.
  • Separation by slash up to 32.
  • In LCoV's work area, hidden pin functions are displayed with dimmed color.
        for example:   P01/D1/TxD1/TIMER3IO
    But in BSch3V, hidden pins are not displayed.
        for example:   P0/TxD

10 Apr 2013 Version 0.80.01

Add:

• Margin of work area can be changed by editing LCOV.INI.
  
  1. Start LCoV.exe
  2. Close LCoV.exe
  3. You can find LCOV.INI in the same folder as LCoV.exe.
  4. Open LCOV.INI with a Text editor.
  5. Change a parameter of "EditWindowMargin" of [Setting].
     Valid value is 50 to 200.

03 Jan 2013 Version 0.80.00

Change:

• Supports UNICODE.
  Character code of .CE3 and .LB3 are UTF-8.
  Files created with oldversion (character code of them is local encoding of your PC) can be read.

19 May 2012 Version 0.69.01

Fix:

• When component name has any '&'s, the component name was not displayed correctly in a component list.